Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Kenwood?
Garage door work in Kenwood typically runs $150 – $600 for most repairs, with a single spring replacement at $180 – $340 and a new door installation at $700 – $2200. Small fixes like rollers or track realignment usually land at the low end, while opener replacement and panel work sit in the middle. The written estimate sets the final price, and our estimates are free.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs cost in Kenwood this year, as typical estimated ranges:
| Service | Typical Estimated Range |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2200 |
One note on springs: the spring range above covers a single spring. A matched pair is usually replaced together, so a pair costs about twice that range. We’ll tell you up front which situation you’re in before any work starts.
What pushes a job toward the top of a range? A door with two broken springs, an opener that needs a full replacement rather than a repair, or a panel that has to be matched to a discontinued color. What keeps it low? A single roller, a track knocked out of line, or a cable that frayed without damaging anything else. The number in the table is where the conversation starts, not where it ends.
What Affects Garage Door Pricing in Kenwood
- Brand and parts availability. We work on the brand you have, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. A door from one of these lines usually means parts are straightforward to source; an unusual import can add time and cost. Being factory-familiar with eight major brands keeps most jobs predictable.
- Whether it’s a repair or a replacement. A spring or cable fix sits well below the cost of a new door. When a door is bent beyond safe realignment or panels are no longer made, replacement is the honest answer, and that’s the $700 – $2200 range.
- Single vs. double door. A double-car door carries more weight, needs heavier springs, and takes longer to install. That weight shows up in both repair and installation pricing.
- Opener type. A belt-drive or screw-drive opener swap is quick; adding safety sensors, wall controls, or battery backup to an older setup takes more time. Opener repair is $120 – $320, and full installation is $250 – $550.
- Urgency. A door stuck open overnight or a car locked inside is an emergency. Emergency garage door service exists for exactly that, and getting a specialist out fast matters more than shaving a few dollars.
- What’s actually broken. A door that won’t close may be a sensor, a track, a cable, or a spring. Diagnosing it right the first time is why the price lands where it does instead of creeping up as parts get swapped on a guess.
How to Save on Garage Door Costs
The biggest savings come from catching problems early. A cable that’s starting to fray or a roller that’s squealing is a $110 – $250 fix now; ignored, a bad cable can take a spring with it and double the bill. Have the door looked at when it starts acting differently, not after it stops moving.
A few practical moves:
- Fix the small stuff first. Roller replacement and track realignment are the cheapest line items on the list, and they prevent bigger wear.
- Ask whether a repair beats a replacement. If the opener is ten years old and the motor is failing, a $250 – $550 install may cost less over time than repeated $120 – $320 repairs.
- Get the estimate in writing before work begins. The written estimate sets the final price, so there are no surprises when the job is done.
- Have your opener model and door brand handy when you call. It speeds up diagnosis and helps us quote accurately on the first call.
Estimates are free, so there’s no cost to finding out exactly where your door falls. Call (877) 492-1990 and we’ll walk through it together.
When Repair Makes More Sense Than Replacement
Most homeowners in Kenwood are surprised at how often repair is the right call. A door that’s structurally sound, balanced, and only a few parts away from working properly doesn’t need to be replaced. If the opener, spring, cables, and panels are fine and the issue is a single component, repair wins on cost and time. Replacement makes sense when the door is dented beyond straightening, the panels are discontinued, or the frame has been damaged by impact.
We always explain which bucket you’re in before quoting, and we don’t push a new door when a $150 – $340 repair will do. That’s the benefit of a single-niche focus: garage doors are all we do, so the recommendation is based on the door, not on upselling.
What to Expect When You Call
You’ll describe what the door is doing, and we’ll ask a couple of questions to narrow it down: does it move at all, does the opener run but the door doesn’t, does it reverse partway up. From there we schedule a visit, diagnose on site, and give you a written estimate before touching anything. Most repairs are completed in a single visit once the parts are in hand. For an aging opener or a snapped spring, we handle the full cycle, from the spring to the opener, without handing you off to another trade.
Our technicians have up to 9 years of experience, and the local pro who comes out is licensed and insured as their state requires. If you want the broader picture of what we do, start with Garage Door Repair Old Northeast and work from there.
FAQs – Garage Door Cost in Kenwood
How much does garage door repair cost in Kenwood?
Most garage door repairs in Kenwood run $150 – $600, and the written estimate sets the final price. A single spring is $180 – $340, a cable is $130 – $250, and rollers are $110 – $220. Call (877) 492-1990 for a free estimate on your door.
Is it cheaper to repair or replace a garage door in Kenwood?
Repair is usually cheaper when the door itself is sound: a spring or cable fix at $130 – $340 beats a new door at $700 – $2200. Replacement makes sense when panels are bent beyond repair or no longer available. We’ll tell you which applies before you commit.
How much does a new garage door cost in Kenwood?
A new door installation typically runs $700 – $2200 in Kenwood, depending on size, material, and whether new hardware goes with it. Double doors sit toward the higher end. Call (877) 492-1990 to get a written estimate for your opening.
Can you come today if my door is stuck?
Yes for time-sensitive failures: emergency service handles a door stuck open, a car locked inside, or a door that won’t close at night. Call (877) 492-1990 and we’ll get you on the schedule quickly. Estimates are free.
How much does it cost to replace a garage door spring in Kenwood?
A single spring replacement is $180 – $340, and a matched pair costs about twice that since both are usually replaced together. Springs are under high tension, so this is a job for a trained technician, not a DIY fix. Call (877) 492-1990 to book it.
Pricing reflects the Kenwood market as of 2026. Garage Door Repair Old Northeast offers free estimates – call (877) 492-1990.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Danielle Meyer"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Michelle Wong"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Marisol Ramirez